Struct stm32f4xx_hal::pac::adc1::cr2::W

pub struct W(_);

Register CR2 writer

Implementations

impl W

pub fn swstart(
    &mut self
) -> BitWriterRaw<'_, u32, CR2_SPEC, SWSTART_A, BitM, 30>

Bit 30 - Start conversion of regular channels

pub fn exten(
    &mut self
) -> FieldWriterRaw<'_, u32, CR2_SPEC, u8, EXTEN_A, Safe, 2, 28>

Bits 28:29 - External trigger enable for regular channels

pub fn extsel(
    &mut self
) -> FieldWriterRaw<'_, u32, CR2_SPEC, u8, EXTSEL_A, Unsafe, 4, 24>

Bits 24:27 - External event select for regular group

pub fn jswstart(
    &mut self
) -> BitWriterRaw<'_, u32, CR2_SPEC, JSWSTART_A, BitM, 22>

Bit 22 - Start conversion of injected channels

pub fn jexten(
    &mut self
) -> FieldWriterRaw<'_, u32, CR2_SPEC, u8, JEXTEN_A, Safe, 2, 20>

Bits 20:21 - External trigger enable for injected channels

pub fn jextsel(
    &mut self
) -> FieldWriterRaw<'_, u32, CR2_SPEC, u8, JEXTSEL_A, Unsafe, 4, 16>

Bits 16:19 - External event select for injected group

pub fn align(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, ALIGN_A, BitM, 11>

Bit 11 - Data alignment

pub fn eocs(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, EOCS_A, BitM, 10>

Bit 10 - End of conversion selection

pub fn dds(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, DDS_A, BitM, 9>

Bit 9 - DMA disable selection (for single ADC mode)

pub fn dma(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, DMA_A, BitM, 8>

Bit 8 - Direct memory access mode (for single ADC mode)

pub fn cont(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, CONT_A, BitM, 1>

Bit 1 - Continuous conversion

pub fn adon(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, ADON_A, BitM, 0>

Bit 0 - A/D Converter ON / OFF

pub unsafe fn bits(&mut self, bits: u32) -> &mut W

Writes raw bits to the register.

Methods from Deref<Target = W<CR2_SPEC>>

pub unsafe fn bits(&mut self, bits: <REG as RegisterSpec>::Ux) -> &mut W<REG>

Writes raw bits to the register.

Trait Implementations

impl Deref for W

type Target = W<CR2_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<W as Deref>::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut <W as Deref>::Target

Mutably dereferences the value.

impl From<W<CR2_SPEC>> for W

fn from(writer: W<CR2_SPEC>) -> W

Converts to this type from the input type.