Struct stm32f4xx_hal::pac::ADC1

source · [−]

pub struct ADC1 { /* private fields */ }

Expand description

Analog-to-digital converter

Implementations

source

impl ADC1

source

pub const PTR: const RegisterBlock = {0x40012000 as const stm32f4::stm32f401::adc1::RegisterBlock}

Pointer to the register block

source

pub const fn ptr() -> *const RegisterBlock

Return the pointer to the register block

Methods from Deref<Target = RegisterBlock>

source

pub fn jofr1(&self) -> &Reg<JOFR_SPEC>

0x14 - injected channel data offset register x

source

pub fn jofr2(&self) -> &Reg<JOFR_SPEC>

0x18 - injected channel data offset register x

source

pub fn jofr3(&self) -> &Reg<JOFR_SPEC>

0x1c - injected channel data offset register x

source

pub fn jofr4(&self) -> &Reg<JOFR_SPEC>

0x20 - injected channel data offset register x

source

pub fn jdr1(&self) -> &Reg<JDR_SPEC>

0x3c - injected data register x

source

pub fn jdr2(&self) -> &Reg<JDR_SPEC>

0x40 - injected data register x

source

pub fn jdr3(&self) -> &Reg<JDR_SPEC>

0x44 - injected data register x

source

pub fn jdr4(&self) -> &Reg<JDR_SPEC>

0x48 - injected data register x

Trait Implementations

source

impl Channel<ADC1> for PA0<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PA1<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PA2<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PA3<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PA4<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PA5<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PA6<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PA7<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PB0<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PB1<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PC0<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PC1<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PC2<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PC3<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PC4<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for PC5<Analog>

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for Temperature

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for Vbat

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Channel<ADC1> for Vref

type ID = u8

Channel ID type Read more

source

fn channel() -> u8

Get the specific ID that identifies this channel, for example 0_u8 for the first ADC channel, if Self::ID is u8. Read more

source

impl Debug for ADC1

source

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

source

impl Deref for ADC1

type Target = RegisterBlock

The resulting type after dereferencing.

source

fn deref(&self) -> &<ADC1 as Deref>::Target

Dereferences the value.

source

impl<PIN> OneShot<ADC1, u16, PIN> for Adc<ADC1>where
PIN: Channel<ADC1, ID = u8>,

type Error = ()

Error type returned by ADC methods

source

fn read(&mut self, pin: &mut PIN) -> Result<u16, Self::Error>

Request that the ADC begin a conversion on the specified pin Read more

source

impl PeriAddress for ADC1

source

fn address(&self) -> u32

Returns the address to be used by the DMA stream.

type MemSize = u16

Memory size of the peripheral.

source

impl RccBus for ADC1

type Bus = APB2

Bus type;

source

impl Reset for ADC1

source

fn reset(rcc: &RccRB)

source

impl DMASet<StreamX<DMA2, 0>, 0, PeripheralToMemory> for ADC1

source

impl DMASet<StreamX<DMA2, 4>, 0, PeripheralToMemory> for ADC1

source

impl Send for ADC1

Auto Trait Implementations

impl RefUnwindSafe for ADC1

impl !Sync for ADC1

impl Unpin for ADC1

impl UnwindSafe for ADC1

Blanket Implementations

source

impl<T> Any for Twhere
T: 'static + ?Sized,

source

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

source

impl<T> Borrow<T> for Twhere
T: ?Sized,

const: unstable · source

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

source

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

const: unstable · source

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

source

impl<T> From<T> for T

const: unstable · source

fn from(t: T) -> T

Returns the argument unchanged.

source

impl<T, U> Into for Twhere
U: From<T>,

const: unstable · source

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source

impl<T, U> TryFrom for Twhere
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

source

impl<T, U> TryInto for Twhere
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Struct stm32f4xx_hal::pac::ADC1

Implementations

impl ADC1

pub const PTR: *const RegisterBlock = {0x40012000 as *const stm32f4::stm32f401::adc1::RegisterBlock}

pub const fn ptr() -> *const RegisterBlock

Methods from Deref<Target = RegisterBlock>

pub fn jofr1(&self) -> &Reg<JOFR_SPEC>

pub fn jofr2(&self) -> &Reg<JOFR_SPEC>

pub fn jofr3(&self) -> &Reg<JOFR_SPEC>

pub fn jofr4(&self) -> &Reg<JOFR_SPEC>

pub fn jdr1(&self) -> &Reg<JDR_SPEC>

pub fn jdr2(&self) -> &Reg<JDR_SPEC>

pub fn jdr3(&self) -> &Reg<JDR_SPEC>

pub fn jdr4(&self) -> &Reg<JDR_SPEC>

Trait Implementations

impl Channel<ADC1> for PA0<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PA1<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PA2<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PA3<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PA4<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PA5<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PA6<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PA7<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PB0<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PB1<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PC0<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PC1<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PC2<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PC3<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PC4<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for PC5<Analog>

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for Temperature

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for Vbat

type ID = u8

fn channel() -> u8

impl Channel<ADC1> for Vref

type ID = u8

fn channel() -> u8

impl Debug for ADC1

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

impl Deref for ADC1

type Target = RegisterBlock

fn deref(&self) -> &<ADC1 as Deref>::Target

impl Enable for ADC1

fn enable(rcc: &RccRB)

fn disable(rcc: &RccRB)

pub const PTR: const RegisterBlock = {0x40012000 as const stm32f4::stm32f401::adc1::RegisterBlock}

impl<PIN> OneShot<ADC1, u16, PIN> for Adc<ADC1>where
PIN: Channel<ADC1, ID = u8>,

impl<T> Any for Twhere
T: 'static + ?Sized,

impl<T> Borrow<T> for Twhere
T: ?Sized,

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

impl<T, U> Into<U> for Twhere
U: From<T>,

impl<T, U> TryFrom<U> for Twhere
U: Into<T>,

impl<T, U> TryInto<U> for Twhere
U: TryFrom<T>,